ACTIONMILL INOX-Groover
Milling
Brand: ACTIONMILL
The ACTIONMILL INOX-Groover is a three-flute 3D plunge and ramping cutter from Ø 0.7 to Ø 8 mm that allows vertical plunging (90°), ramping up to 70° as well as roughing and finishing with a single tool. It is available with 1.5xD and 3xD cutting length, with corner chamfer or corner radius (toric) and optionally with integrated coolant channels that deliver coolant around the full tool circumference into the cutting zone, protecting the tool from overheating when machining titanium alloys and stainless steels. The INOX-optimized cutting geometry, the reinforced h5 shank and the α-INOX high-performance coating reduce cutting forces, prevent chip adhesion and ensure long tool life in tough, corrosion-resistant alloys.
Short description
- Three-flute micro cutters from Ø0.7 mm to Ø8.0 mm
- Plunging, ramping (70°) or vertical (90°) drilling possible
- Available with 1.5xD and 3xD cutting lengths, with & without integrated coolant
- Available sharp with small corner chamfers or with corner radii
- Roughing and finishing with just one tool
- Suitable for titanium, stainless steel and CoCr alloys
Item variants
Items (26)
| Item number |
D1
(mm)
|
D1
(inch)
|
D2
(mm)
|
D3 h5
(mm)
|
L1
(mm)
|
L2
(mm)
|
EF (45°)
(mm)
|
GL
(mm)
|
Z
(pc.)
|
Stock
(pc.)
|
Price
(net)
|
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AM.GR.070.100-1.5D …070.100-1.5D | 0,700 | — | — | 4,00 | 1,00 | 1,80 | 0,02 | 40,00 | 3 | |||
| AM.GR.080.120-1.5D …080.120-1.5D | 0,800 | — | — | 4,00 | 1,20 | 2,00 | 0,02 | 40,00 | 3 | |||
| AM.GR.090.130-1.5D …090.130-1.5D | 0,900 | — | — | 4,00 | 1,30 | 2,30 | 0,02 | 40,00 | 3 | |||
| AM.GR.100.150-1.5D …100.150-1.5D | 1,000 | — | — | 4,00 | 1,50 | 2,50 | 0,03 | 40,00 | 3 | |||
| AM.GR.120.180-1.5D …120.180-1.5D | 1,200 | — | — | 4,00 | 1,80 | 3,00 | 0,03 | 40,00 | 3 | |||
| AM.GR.150.220-1.5D …150.220-1.5D | 1,500 | — | — | 4,00 | 2,20 | 3,30 | 0,03 | 40,00 | 3 | |||
| AM.GR.1587.240-1.5D …1587.240-1.5D | 1,587 | 1/16" | — | 4,00 | 2,40 | 3,40 | 0,03 | 40,00 | 3 | |||
| AM.GR.180.270-1.5D …180.270-1.5D | 1,800 | — | — | 4,00 | 2,70 | 3,70 | 0,03 | 50,00 | 3 | |||
| AM.GR.200.300-1.5D …200.300-1.5D | 2,000 | — | — | 4,00 | 3,00 | 4,00 | 0,03 | 50,00 | 3 | |||
| AM.GR.220.330-1.5D …220.330-1.5D | 2,200 | — | — | 4,00 | 3,30 | 4,30 | 0,03 | 50,00 | 3 | |||
| AM.GR.2381.360-1.5D …2381.360-1.5D | 2,381 | 3/32" | — | 4,00 | 3,60 | 4,60 | 0,05 | 50,00 | 3 | |||
| AM.GR.250.370-1.5D …250.370-1.5D | 2,500 | — | — | 6,00 | 3,70 | 4,80 | 0,05 | 50,00 | 3 | |||
| AM.GR.280.420-1.5D …280.420-1.5D | 2,800 | — | — | 6,00 | 4,20 | 5,20 | 0,05 | 50,00 | 3 | |||
| AM.GR.300.450-1.5D …300.450-1.5D | 3,000 | — | — | 6,00 | 4,50 | 5,50 | 0,05 | 50,00 | 3 | |||
| AM.GR.3175.480-1.5D …3175.480-1.5D | 3,175 | 1/8" | — | 6,00 | 4,80 | 5,80 | 0,05 | 50,00 | 3 | |||
| AM.GR.350.520-1.5D …350.520-1.5D | 3,500 | — | — | 6,00 | 5,20 | 6,30 | 0,05 | 50,00 | 3 | |||
| AM.GR.370.550-1.5D …370.550-1.5D | 3,700 | — | — | 6,00 | 5,50 | 6,60 | 0,05 | 50,00 | 3 | |||
| AM.GR.3968.600-1.5D …3968.600-1.5D | 3,968 | 5/32" | — | 6,00 | 6,00 | 6,90 | 0,05 | 50,00 | 3 | |||
| AM.GR.400.600-1.5D …400.600-1.5D | 4,000 | — | — | 6,00 | 6,00 | 6,90 | 0,05 | 50,00 | 3 | |||
| AM.GR.430.650-1.5D …430.650-1.5D | 4,300 | — | — | 8,00 | 6,50 | 7,40 | 0,05 | 68,00 | 3 | |||
| AM.GR.4762.710-1.5D …4762.710-1.5D | 4,762 | 3/16" | 4,65 | 8,00 | 7,10 | 8,20 | 0,05 | 68,00 | 3 | |||
| AM.GR.500.750-1.5D …500.750-1.5D | 5,000 | — | — | 8,00 | 7,50 | 8,50 | 0,05 | 68,00 | 3 | |||
| AM.GR.5556.830-1.5D …5556.830-1.5D | 5,556 | 7/32" | — | 8,00 | 8,30 | 9,40 | 0,05 | 68,00 | 3 | |||
| AM.GR.600.900-1.5D …600.900-1.5D | 6,000 | — | — | 8,00 | 9,00 | 10,00 | 0,05 | 68,00 | 3 | |||
| AM.GR.6350.900-1.5D …6350.900-1.5D | 6,350 | 1/4" | — | 10,00 | 9,00 | 10,00 | 0,05 | 80,00 | 3 | |||
| AM.GR.800.1200-1.5D …800.1200-1.5D | 8,000 | — | — | 10,00 | 12,00 | 13,00 | 0,05 | 80,00 | 3 |
swipe
